There are a lot of ways to stick your blankets with a perfect pattern. In the literature, blanket stitch refers to the kind of hand stitch you can use for thick materials like felt and wool. Not only for the main purpose but also for decoration of your blanket borders you can apply this one together with your children. Here you will find three main ways to stitch your blankets: stitching your blankets from its edges, stitching your blanket along the edge with one layer, and stitching your blanket along the edge with two layers.
All you need to stitch your blanket is embroidery thread and embroidery needle. You will also find some blanket products at the end of the Amazon website to have some idea about it. It is always important to know a trustable platform for online shopping.
Also even not for online shopping, you can check the features of the product you are planning to buy and then go your blanket store to purchase it. By doing so you will not waste your valuable time.
3 Easy Methods to Stitch Your Blankets
Below you will find three methods to stitch your blanket easily. You can stitch it from the edges, or along the layers. For the layers stitching, you can make it as one layer or two layers as two main alternatives. You can find the best and easiest one for you after reading all of them!
1.Sticking Your Blankets From Its Edges
The first method to stitch your blanket might be from edges. The first thing you need to do is to thread your needle and after that, you can start to knot the tail end.
With your needle, you can start by sending it at the bottom edge of the piece. The second part you need to follow is to start your first stitch.
For the first stitch, you can poke the needle down to the back. This back distance should be around 1/4″ away from where the thread you had first. For the distance from the edge, it also should be around 1/4″.
What is next to be done with your first stitch? It is needed to poke your needle from the back to the front. The thing you need to be careful here is to better from straight down from.
At the same time, this step is better from the right at the bottom edge of the piece of your blanket. Yet, you need your needle through the loop of thread. It is better before pulling this stitch tight to send your needle through the loop of thread.
The thing I can suggest to you at this point is to provide your thread stays under your needle. At the same time, you can keep having from each stitch. It is almost done now to stitch from the edges but you should thread your needle.
After that, it is time to knot the tail end by poking your needle up from the back at the bottom edge. And then you are in the last step. You can slide your needle under the loose loop you left. Needless to say, you can pull your stitch tight into place to be done with stitching your blanket from the edges.
While poking your needle down to the back, you should not miss to make it on the right side of your last stitch and knot off your thread. Now your blanket is ready to be used in your best days with enjoy!
2.Stitching Your Blanket Along Edge With One Layer
The second method to stitch your blanket is to stitch it along the edge with one layer. To begin with, you need to thread your needle and knot the tail starting from the end.
You should know that it is better to start with your needle from the back. Just like the former method of stitching from the edges, here is also needed to be done about 1/4″ in from the edge.
Alternatively, you can make it from its length according to your wish to stitch with. After that, it is needed to get the stitch anchored. By providing this, you need to poke your needle up from the back again.
Therefore, the needle you need would come out of the top at the same spot. That spot is just where you started, which is able to create a loop around the edge.
After that, the next step is to send your needle under the loop stitch you already had. You can have it by poking the needle under the stitch. That stitch should stay on sideways at the edge of the felt.
Although it is not the very first stitch, it means your thread gets anchored by having so.
Subsequently, it is time to have the first your very first blanket stitch now. You can poke your needle down from the top. That distance must be around approximately 1/4″ over from the thread where your first came already.
From the edge, it must be about 1/4″ up as well. Yet, you are still not with your first stitch. To be done, you need to bring your needle up from the back.
It should be through the loop of thread, which is able to create a straight line down. You can pull this stitch tight through the loop of thread. After that, you can keep doing each stitch in the same way.
Congratulations! You are done now with stitching your blanket from the open laser. In other words, you are ready to start another stitch by poking the needle down.
You can pull the thread all the way through as you did in the former step. However, you should be very careful not to pull it tight so that you will not face possible unpleasant conditions later. It is needed to leave enough of a loop, and therefore you can catch this loop with your new piece of thread.
After that, you can make it tight by pulling that stitch into place. If you want to lose to leave this last stitch before the knot, you can lay the loose loop of thread across. It is like you had properly finished the stitch, you can think of this way.
You need to thread a needle onto the new piece of thread and tie the tail of the new piece. The main purpose of doing this is to provide the loose stitch of thread stays the length you planned already.
Finally, you can complete the stitch to left loose. You can slide your needle underneath the loose stitch you left. After that, it is better to pull your stitch tight into place. If you want to connect your last stitch to your first stitch, you can slide your needle sideways underneath your first stitch by pulling it. You can also poke your needle down at the top of the first stitch you have.
3.Stitching Your Blanket Along Edge With Two Layers
The last method to stitch your blanket is to stitch it along the edge with two layers. You can start by threading your needle and then it is time to knot the tail end.
Secondly, you can start the knot between the two layers and poke your needle down through the bottom layer. The aim of this step is to put your knot in between the two layers. The distance between them should be done around 1/4″ in from the edge. You can also make it at whatever length you plan your stitches to stay.
The next step is to get the stitch anchored, To make this possible, you need to poke your needle down from the top layer. By having so, your needle comes out the bottom at the same spot where you already started. You can easily make a loop at the end of this process.
Subsequently, it is time to take your needle and send it under the loop stitch you already have. You can poke the needle by having this under the stitch going sideways along the crack of the two layers. At the end of this, you will get your thread anchored.
Just like the former method, I should remind you of the fact that it is not your first stitch. To make the first stitch of your blanket, you need to poke your needle down from the top.
The distance must be around 1/4″ over from the thread. When it comes to the distance from the edge, it should be around approximately 1/4″ up from the edge.
The next step is to be done with your first stitch. You need to bring your needle up from the back and through the loop of thread, which is able to create a straight line down.
However, you should check twice before making it tight since your needle should be through the loop of thread. By having so, you already know how the loop needed to be underneath. It should be with the thread coming out over the top.
After that, it is time to continue each stitch in the same way. Now you can poke the needle down just like the former one to have another stitch. However, the thing you should take into consideration is should go through the top layer.
You need to pull the thread all the way through without pulling it tight yet. After that, by leaving enough of a loop you can catch this loop and pull that stitch tight into place.
You should lay the loose loop of thread across to get a finished the stitch. At the same time, you can cut your thread. This knotting step following is with the knot tight against the felt. In other words, it is for your loose loop of thread staying the length of your design beforehand.
It is time to thread your needle and knot the tail end again. Again you should make your needle poke down and have a 1/4″ up from the edge from the bottom layer. You are not done yet with your last stitch. If you want to finish it, you need to slide your needle under the loose loop you left.
As the next step, you can pull your stitch tight into place and, slide your needle sideways underneath your first stitch so that you can connect your last stitch to your first stitch.
You can loop your needle through that stitch again if you are very sure about the fact that you send your needle through the loop in order to make a knot. If you become sure, you can pull it tight to complete the knot. If you want to hide the knot and the tail ends for a better look at your blanket, you need to send your needle between these two layers as the last step.
What about stitching baby blankets? If you wonder how many stitches should you cast on, it depends on two main things. They can be listed that the size you are finished of the baby blanket will have, and the number of stitches per inch/stitches per 10 centimeters.
After deciding them, you can take the measurement for the width of your blanket related to the sizes in the graphic. And then you need to multiply it by your gauge so that you can decide now how many stitches you should cast on.
However, for those who use the metric system, they should know that the blanket sizes should be given in centimeters and therefore it is needed to state gauge in stitches per 10 centimeters. In other words, it is time to convert one of the numbers to get the same units. As a second option, you can take one zero off your cast on a number to compensate and now you already converted it to the metric system.
The Ways to Change Threads When Stitching Your Blankets
When stitching your blanket, you will realize that his process uses a lot of threads. In other words, you need to change quite often your thread but the point is that you should hide the knots by doing this for a better look.
Here is an opinion for you to make your workload easier. if you want not to face any problem when doing it, you can change the rope color so that you can know where the new thread is.
You should know that the first knot off as the last stitch. It is okay to put your needle through the fabric close to the edge but you should pull the thread tight so that you will not face any problem related to the tightness. After that, you need to put the needle through the loop. I need to remind you again that you should pull it tight.
Subsequently, you need to knot off and pull the thread after ending down. It is needed because by having this you will make the other piece invalid and unhidden. When you come to the last thread knotted at the end, you need to take a small stitch through the underneath fabric.
Lastly, you need to put the two pieces of fabric back together. In this step, you should find a new thread ready for the next step of keeping sewing.
Some Good Blanket Options for You
Here you will find four blanket options from the amazon website so that you can take some idea and create a new one in your mind. It is better to check the website with the link below for more information.
- Twin Size Weighted Blanket (48”x 78”, 100% Natural Cotton, Grey)
The last product I can suggest is engineered to be around 7-12% of your body weight. During the time when you feel sick and when you have a fever, this product offers you and your children.
Moreover, this product is made from high-quality, super soft, and cozy, which lets you have breathability as a perfect bedroom set.
when taking a nap, living room’s couch while watching television. It is not only can be used at sleep but also can be used while reading. You should not miss this chance to have one for you and your children if it fits your needs and personal taste.
It has just a reasonable price which you can afford for perfect home decoration. The price of Weighted Idea Cool Weighted Blanket Twin Size 15 lbs Adults product is $46.99.
If you are interested in this product to purchase, you can check the website for more details:https://www.amazon.com/Weighted-Idea-Cooling-Blanket-Natural/dp/B074BX8YMW/ref=sr_1_7?keywords=Weighted+Blanket&qid=1579165723&sr=8-7
- Micro-Fleece Plush Blanket for Toddler Bed
Micro-Fleece Plush Baby Blanket for Toddler Bed creates the ultimate soft and fuzzy touch for sensitive skins.
Especially when you compared it with another type of blankets like cotton fiber, we can say that this one is more durable with the stain-resistant feature.
I think you will love this blanket especially because of being too light and not too heavy at the same time.
You can use it for all seasons including spring, summer, fall or winter. No risks of overheating or catching a cold in chilly, winter nights. It is certified by SGS and CPSIA tests, which sized 39 by 47 inches.
Apart from that. this product is designed to be extra wider and longer so that it can fit babies that age from infant to toddler.
When you go somewhere to visit or travel, it can be easily folded to pack away. You can also use it for tummy time, cuddling, crib, stroller, car seat, and picnic.
For the cleaning and washing, you can wash before you use the first time in your machine wash cold on a gentle cycle. It is okay to tumble dry on low heat when you need it.
It has just a reasonable price which you can afford for perfect home decoration. The price of TILLYOU All Season Micro-Fleece Plush Baby Blanket for Toddler Bed product is $13.99.
If you are interested in this product to purchase, you can check the website for more details:https://www.amazon.com/TILLYOU-ALL-SEASON-Flannel-Blanket-Toddler/dp/B078SKR8MY/ref=sr_1_2_sspa?crid=H9XSHXD8BMYZ&keywords=baby+blankets+for+boys&qid=1574616952&sprefix=baby+blanket%2Caps%2C313&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUExQUJTTjJBN0lUSEQzJmVuY3J5cHRlZElkPUEwNjA0NDAxMjBQSkY3VUVSTDE4UiZlbmNyeXB0ZWRBZElkPUEwNzA3MTY1NUtWTDMwNVUwM0c5JndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
- Swaddle Blanket with Hat
The product with 100% cotton offers your newborn baby a sense of wapping in love. There is no need for gift wrap when you buy a set of these swaddle wraps. For example, it is valid when you have one for your best friend’s baby shower. It is because it comes with a perfectly packaged in a red and white gift box.
There is an adjustable fastener and extra-stretchy fabric so that it can fit your baby perfectly whenever you want like early morning, noon, and night.
It has just a reasonable price which you can afford for perfect home decoration. The price of Unisex Swaddle Blanket with Hat product is $24.99.
If you are interested in this product to purchase, you can check the website for more details:https://www.amazon.com/Unisex-Swaddle-Blanket-Hat-Pack/dp/B07W3C5D48/ref=sr_1_3_sspa?keywords=unisex+baby+blankets&qid=1574618524&sr=8-3-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyUlJXWjFNQlhEODE1JmVuY3J5cHRlZElkPUEwMDc2Nzg5MVNIVk1VMTNENVg4OSZlbmNyeXB0ZWRBZElkPUEwMzMzNDc5MTZSQk1HRjcwQjBZNyZ3aWRnZXROYW1lPXNwX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
- Sherpa Fleece Blanket Twin Size Grey Plush Blanket
The last recommendation is the one with 100% microfiber material. I am sure you will feel some different senses of softness to improve your sleep with one side of smooth when you have this product.
It measures 60″ x 80″, and therefore if it is okay for your bed and couch, you should have one to enhance your home decoration and have a better look for your furniture.
Moreover, especially the color tones and patterns will make you satisfied enough, I believe. Apart from that, by having this product you can protect your and your children’s bed and couch from dirt and stain so that you can keep them fresh and clean all the time.
In fact, this product provides very good fade and stain resistance than other cotton blanket options. You should not miss this chance to have one for you and your children if it fits your needs and personal taste.
It has just a reasonable price which you can afford for perfect home decoration. The price of Bedsure Sherpa Fleece Blanket Twin Size Grey Plush Blanket product is $29.99.
If you are interested in this product to purchase, you can check the website for more details:https://www.amazon.com/BEDSURE-Sherpa-Fleece-Blanket-Microfiber/dp/B0158ER0E6/ref=sr_1_10?keywords=soft+blanket&qid=1579273823&s=bedbath&sr=1-10
